Thursday, 26 February 2015

Another fake flash story

I recently purchased a 64GB mini SD card to slot in to my laptop and/or tablet, keeping media separate from my home directory pretty full of kernel sources.

This Samsung card looked fast enough, and at 25€ include shipping, seemed good enough value.

Hmm, no mention of the SD card size?

The packaging looked rather bare, and with no mention of the card's size. I opened up the packaging, and looked over the card.

Made in Taiwan?

What made it weirder is that it says "made in Taiwan", rather than "Made in Korea" or "Made in China/PRC". Samsung apparently makes some cards in Taiwan, I've learnt, but I didn't know that before getting suspicious.

After modifying gnome-multiwriter's fake flash checker, I tested the card, and sure enough, it's an 8GB card, with its firmware modified to show up as 67GB (67GB!). The device (identified through the serial number) is apparently well-known in swindler realms.

Buyer beware, do not buy from "carte sd" on, and always check for fake flash memory using F3 or h2testw, until udisks gets support for this.

Amazon were prompt in reimbursing me, but the Comité national anti-contrefaçon and Samsung were completely uninterested in pursuing this further.

In short:

  • Test the storage hardware you receive
  • Don't buy hardware from Damien Racaud from Chaumont, the person behind the "carte sd" seller account

Monday, 8 December 2014

A look at new developer features

As the development window for GNOME 3.16 advances, I've been adding a few new developer features, selfishly, so I could use them in my own programs.

Connectivity support for applications

Picking up from where Dan Winship left off, we've merged support for application to detect the network availability, especially the "connected to a network but not to the Internet" case.

In glib/gio now, watch the value of the "connectivity" property in GNetworkMonitor.

Grilo automatic network awareness

This glib/gio feature allows us to show/hide Grilo sources from applications' view if they require Internet and LAN access to work. This should be landing very soon, once we've made the new feature optional based on the presence of the new GLib.


And finally, this means we'll soon be able to show a nice placeholder when no network connection is available, and there are no channels left.

Grilo Lua resources support

A long-standing request, GResources support has landed for Grilo Lua plugins. When a script is loaded, we'll look for a separate GResource file with ".gresource" as the suffix, and automatically load it. This means you can use a local icon for sources with the URL "resource:///org/gnome/grilo/foo.png". Your favourite Lua sources will soon have icons!

Grilo Opensubtitles plugin

The developers affected by this new feature may be a group of one, but if the group is ever to expand, it's the right place to do it. This new Grilo plugin will fetch the list of available text subtitles for specific videos, given their "hashes", which are now exported by Tracker.

GDK-Pixbuf enhancements

I can point you to the NEWS file for the latest version, but the main gains are that GIF animations won't eat all your memory, DPI metadata support in JPEG, PNG and TIFF formats, and, for image viewers, you can tell whether a TIFF file is multi-page to open it in a more capable viewer.

Batched inserts, and better filters in GOM

Does what it says on the tin. This is useful for populating the database quicker than through piecemeal inserts, it also means you don't need to chain inserts when inserting multiple items.

Mathieu also worked on fixing the priority of filters when building complex queries, as well as supporting more than 2 items in a filter ("foo OR bar OR baz" for example).

Saturday, 1 November 2014

Hardware support news


I dusted off (literally) my Logitech Marble trackball to replace the Intuos tablet + mouse combination that I was using to cut down on the lateral movement of my right arm which led to back pains.

Not that you care about that one bit, but that meant that I needed a way to get a scroll wheel working with this scroll-wheel less trackball. That's now implemented in gnome-settings-daemon for GNOME 3.16. You'd run:

gsettings set org.gnome.settings-daemon.peripherals.trackball scroll-wheel-emulation-button 8

With "8" being the mouse button number to use to make the trackball ball into a wheel. We plan to add an interface to configure this in the Settings.


Touchscreens are now switched off when the screensaver is on. This means you'll usually need to use one of the hardware buttons on tablets, or a mouse or keyboard on laptops to turn the screen back on.

Note that you'll need a kernel patch to avoid surprises when the touchscreen is re-enabled.

More touchscreens

The driver for the Goodix touchscreen found in the Onda v975w is now upstream as well.

Tuesday, 21 October 2014

A GNOME Kernel wishlist

GNOME has long had relationships with Linux kernel development, in that we would have some developers do our bidding, helping us solve hard problems. Features like inotify, memfd and kdbus were all originally driven by the desktop.

I've posted a wishlist of kernel features we'd like to see implemented on the GNOME Wiki, and referenced it on the kernel mailing-list.

I hope it sparks healthy discussions about alternative (and possibly existing) features, allowing us to make instant progress.

Tuesday, 30 September 2014

GTK+ widget templates now in Javascript

Let's get the features in early!

If you're working on a Javascript application for GNOME, you'll be interested to know that you can now write GTK+ widget templates in gjs.

Many thanks to Giovanni for writing the original patches. And now to a small example:

const MyComplexGtkSubclass = new Lang.Class({
    Name: 'MyComplexGtkSubclass',
    Extends: Gtk.Grid,
    Template: 'resource:///org/gnome/myapp/widget.xml',
    Children: ['label-child'],

    _init: function(params) {

        this._internalLabel = this.get_template_child(MyComplexGtkSubclass,

And now you just need to create your widget:

let content = new MyComplexGtkSubclass();
content._internalLabel.set_label("My updated label");

You'll need gjs from git master to use this feature. And if you see anything that breaks, don't hesitate to file a bug against gjs in the GNOME Bugzilla.

Monday, 22 September 2014

On fêtera la sortie de GNOME 3.14 mardi soir à Lyon

In French, for a change :)

Mardi soir, le 23 septembre, quelques-uns d'entre nous se retrouveront vers 18h30 au Smoking Dog pour quelques boissons, et poursuivront avec un dîner indien prés du métro St-Jean.

N'hésitez pas à vous inscrire sur le Wiki, que vous soyez utilisateurs de GNOME, développeurs ou simplement des amis du logiciel libre.

À mardi!

Sunday, 21 September 2014

Fresh software from the 3.14 menu

Here is a small recap of the GNOME 3.14 features I worked on. Some are already well publicised, through blogs:
And obviously loads of bug fixes, and patch reviews. And I do mean loads :)

To look forward to

If all goes according to plan, I'll be able to merge the aforementioned automatic rotation support into systemd/udev. The kernel API is pretty bad, which makes the user-space code look bad...

The first parts of ebooks support in gnome-documents have already been written, scheduled for 3.16.

And my favourites

Note: With links that will open up like a Christmas present when GNOME 3.14 is released.

There are a lot of big, new features in GNOME 3.14. The Adwaita rewrite made it possible to polish the theme greatly. The captive portals support is very useful, the travelling you will enjoy this (I certainly have!).

But my favourite new feature has to be the gestures support in gnome-shell. I'll make good use of that :)